Professor Arthur Lees

Research Highlights

1. Sinha, J., Lees, A., Friswell, M., & Lees, A. (2004). Estimating unbalance and misalignment of a flexible rotating machine from a single run-down. , 967-989.

   https://doi.org/10.1016/j.jsv.2003.03.006, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1948
2. Chang, J. & Lees, A. (2004). Guidelines for the implementation of the CWELD and ACM2 spotweld models in structural dynamics. , 193-210.

   https://doi.org/10.1016/j.finel.2004.03.003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1949
3. Friswell, M., Lees, A., Price, E., & Lees, A. (2005). Detection of severe sliding and pitting fatigue wear regimes through the use of broadband acoustic emission. , 85-98.

   https://doi.org/10.1243/135065005X9817, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1950
4. Sinha, J., Lees, A., Friswell, M., & Lees, A. (2004). Estimating the static load on the fluid bearings of a flexible rotating machine from run-down data. , 1349-1368.

   https://doi.org/10.1016/j.ymssp.2003.11.002, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1951
5. Lees, A. (2009). Heat transfer and pressure drop in furrowed channels with transverse and skewed sinusoidal wavy walls. International Journal of Heat and Mass Transfer

   https://doi.org/10.1016/j.ijheatmasstransfer.2009.02.039, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5609
6. Lees, A. (2010). Heat transfer of tilted reciprocating thermosyphon with jet entry flow. International Journal of Heat and Mass Transfer

   https://doi.org/10.1016/j.ijheatmasstransfer.2009.12.019, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5610
7. Lees, A., Friswell, M., & Adhikari, S. (2010). Time domain analysis of a viscoelastic rotor using internal variable models. International Journal of Mechanical Sciences

   https://doi.org/10.1016/j.ijmecsci.2010.06.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5611
8. Lees, A. (2010). Endwall heat transfer and pressure drop in scale-roughened pin-fin channels. International Journal of Thermal Sciences

   https://doi.org/10.1016/j.ijthermalsci.2009.09.008, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5612
9. Lees, A. (2010). Heat transfer of a radially rotating furrowed channel with two opposite skewed sinusoidal wavy walls. International Journal of Thermal Sciences

   https://doi.org/10.1016/j.ijthermalsci.2009.11.011, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5613
10. Lees, A. & Friswell, M. (2009). Model-based identification of rotating machines. Mechanical Systems and Signal Processing

    https://doi.org/10.1016/j.ymssp.2008.08.008, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5614
11. Lees, A. (2011). Smart machines with flexible rotors. Mechanical Systems and Signal Processing

    https://doi.org/10.1016/j.ymssp.2010.09.006, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5615
12. Lees, A. (2009). Influence of spiky twisted tape insert on thermal fluid performances of tubular air–water bubbly flow. International Journal of Thermal Sciences

    https://doi.org/10.1016/j.ijthermalsci.2009.05.002, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5616

All Research