Dr Nick Croft

Uwch-ddarlithydd

Aerospace Engineering

+44 (0) 1792 602328

t.n.croft@abertawe.ac.uk

Swyddfa Academaidd - A_204
Ail lawr
Adeilad Canolog Peirianneg
Campws y Bae

Ar gael ar gyfer Goruchwyliaeth Ôl-raddedig

Dolenni Ymchwil

https://orcid.org/0000-0002-1521-5261

Trosolwg

Prif nod ymchwil Dr Croft yw datblygu technegau effeithlon a chywir ar gyfer datrys problemau dynameg hylifau cyfrifiannol (CFD) mewn geometreg bywyd go iawn. Y dull y mae’n ei ddilyn yw ymestyn y dull Cyfaint Meidraidd (FV), sy'n cynnig gweithdrefn ateb hynod effeithlon ar y rhwyllau Cartesaidd, i ymdrin â'r rhwyllau anstrwythuredig sydd eu hangen i gynrychioli'r geometrau sy'n bresennol mewn cymwysiadau peirianyddol. Defnyddiwyd y feddalwedd a ddilynodd mewn ystod eang o feysydd cymhwyso ond fe'i defnyddiwyd yn bennaf i efelychu prosesau o fewn diwydiannau prosesu metelau. Mae'r prosesau hyn yn gofyn am atebion ar ben CFD ond gallant hefyd gynnwys anffurfiad strwythurol, effeithiau electro-fagnetig, cyfnodau gronynnol, adweithiau cemegol ac effeithiau ymbelydredd sydd i gyd wedi'u datrys mewn un fframwaith meddalwedd.

Mae'r prif ddull y mae Dr Croft wedi'i ddefnyddio i ymestyn y dull FV i'r rhwyllau anstrwythuredig wedi'i seilio ar y dechneg sy'n canolbwyntio ar gyfresi celloedd. Mae ymestyn y dull hwn i'r rhwyllau anstrwythuredig yn arwain at weithdrefn ateb effeithlon, o'i chymharu â dulliau rhwyllau anstrwythuredig eraill, ond mae ansawdd y rhwyllau’n effeithio ar y cywirdeb a'r angen i amcangyfrif fflycsau arwyneb o werthoedd elfennol. Mae datblygiadau yn y ddau faes yma wedi gwella cywirdeb y dull gweithredu ond mae ffiniau o hyd i’w gymhwysedd. Mae Dr Croft wedi bod yn ymwneud â goruchwylio prosiectau PhD sydd wedi ymchwilio i gyplu FV sy'n seiliedig ar fertigau, sy'n ymdrin â rhwyllau anstrwythuredig yn dda iawn ond nad yw'n effeithlon iawn, gyda FV sy'n canolbwyntio ar gelloedd i gynnig dull graddol o ymdrin â'r hydrodynameg a hefyd y defnydd o dechnegau aml-grid ar yr un pryd a'u cymhwyso gan ddefnyddio rhwyllau anstrwythuredig.

Meysydd Arbenigedd

Deinameg hylif cyfrifiannol
Prosesu metelau
Dyfeisiau ynni adnewyddadwy (gwynt a llanw)
Ansawdd dŵr yfed

Cyhoeddiadau

Uchafbwyntiau Ymchwil

S.A., R., M., T., R., E., B., G., T.N., C., M., C., Croft, N., & Rolland, S. (2015). Performance assessment of a vertical axis turbine in a marine current flume tank and CFD modelling. International Journal of Marine Energy, 12, 35-45.
https://doi.org/10.1016/j.ijome.2015.05.003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25901
Djambazov, G., Bojarevics, V., Pericleous, K., & Croft, N. (2015). Finite volume solutions for electromagnetic induction processing. Applied Mathematical Modelling, 39(16), 4733-4745.
https://doi.org/10.1016/j.apm.2015.03.059, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22081
Hayes, C., Croft, T., Campbell, A., Douglas, I., Gadoury, P., Schock, M., & Croft, N. (2014). Computational modelling techniques in the optimization of corrosion control for reducing lead in Canadian drinking water. Water Quality Research Journal of Canada, 49(1), 82-93.
https://doi.org/10.2166/wqrjc.2013.009, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22003
Hayes, C., Croft, T., & Croft, N. (2012). An investigation into the representativeness of random daytime sampling for lead in drinking water, using computational modelling. Journal of Water Supply: Research and Technology—AQUA, 61(3), 142
https://doi.org/10.2166/aqua.2012.092, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13874
J., E., M., C., T., N., L., M., & Croft, N. (2008). Applications of Multi-Physics Modeling in Metallurgical Processing. Resources Processing, 55(3), 132-138.
https://doi.org/10.4144/rpsj.55.132, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25932
K., P., G., D., B., L., T.-N., C., J.-F., D., P., G., & Croft, N. (2008). Time-dependent modelling and experimental validation of the metal/flux interface in a continuous casting mould. Revue de Métallurgie, 105(1), 33-43.
https://doi.org/10.1051/metal:2008011, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25931
McBride, D., Croft, T., Cross, M., Croft, N., & McBride, D. (2007). A coupled finite volume method for the solution of flow processes on complex geometries. International Journal for Numerical Methods in Fluids, 53(1), 81
https://doi.org/10.1002/fld.1250, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1975
Croft, N. (2007). Computational modelling of multi-physics and multi-scale processes in parallel. International Journal of Computational Methods in Engineering Science and Mechanics, 8
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25905
Williams, A., Croft, T., Cross, M., & Croft, N. (2006). A group based solution strategy for multi-physics simulations in parallel. Applied Mathematical Modelling, 30(7), 656
https://doi.org/10.1016/j.apm.2005.09.002, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1973
Cross, M., Croft, T., Djambazov, G., Pericleous, K., & Croft, N. (2006). Computational modelling of bubbles, droplets and particles in metals reduction and refining. Applied Mathematical Modelling, 30(11), 1445
https://doi.org/10.1016/j.apm.2006.03.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1974

Holl Ymchwil

Erthyglau Cylchgronau

McBride, D., Gebhardt, J., Croft, N., & Cross, M. (2018). Heap Leaching: Modelling and Forecasting Using CFD Technology. Minerals, 8(1), 9
https://doi.org/10.3390/min8010009, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38015
http://www.mdpi.com/2075-163X/8/1/9
Edmunds, M., Williams, A., Masters, I., & Croft, N. (2017). An enhanced disk averaged CFD model for the simulation of horizontal axis tidal turbines. Renewable Energy, 101, 67-81.
https://doi.org/10.1016/j.renene.2016.08.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29491
Zangiabadi, E., Masters, I., Williams, A., Croft, N., Malki, R., Edmunds, M., Mason-Jones, A., & Horsfall, I. (2017). Computational prediction of pressure change in the vicinity of tidal stream turbines and the consequences for fish survival rate. Renewable Energy, 101, 1141-1156.
https://doi.org/10.1016/j.renene.2016.09.063, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30212
Jothi, S., Merzlikin, S., Croft, N., Andersson, J., & Brown, S. (2016). An investigation of micro-mechanisms in hydrogen induced cracking in nickel-based superalloy 718. Journal of Alloys and Compounds, 664, 664-681.
https://doi.org/10.1016/j.jallcom.2016.01.033, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25433
S.A., R., M., T., R., E., B., G., T.N., C., M., C., Croft, N., & Rolland, S. (2015). Performance assessment of a vertical axis turbine in a marine current flume tank and CFD modelling. International Journal of Marine Energy, 12, 35-45.
https://doi.org/10.1016/j.ijome.2015.05.003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25901
Jothi, S., Croft, N., Wright, L., Turnbull, A., & Brown, S. (2015). Multi-phase modelling of intergranular hydrogen segregation/trapping for hydrogen embrittlement. International Journal of Hydrogen Energy, 40(43), 15105-15123.
https://doi.org/10.1016/j.ijhydene.2015.08.093, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23524
Jothi, S., Croft, T., Brown, S., Brown, S., Croft, N., & Jothi, S. (2015). Multiscale multiphysics model for hydrogen embrittlement in polycrystalline nickel. Journal of Alloys and Compounds, 645(1), S500-S504.
https://doi.org/10.1016/j.jallcom.2014.12.073, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa19856
Jothi, S., Winzer, N., Croft, T., Brown, S., Brown, S., Croft, N., & Jothi, S. (2015). Meso-microstructural computational simulation of the hydrogen permeation test to calculate intergranular, grain boundary and effective diffusivities. Journal of Alloys and Compounds, 645, S247-S251.
https://doi.org/10.1016/j.jallcom.2014.12.247, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa19982
Djambazov, G., Bojarevics, V., Pericleous, K., & Croft, N. (2015). Finite volume solutions for electromagnetic induction processing. Applied Mathematical Modelling, 39(16), 4733-4745.
https://doi.org/10.1016/j.apm.2015.03.059, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22081
Togneri, M., Masters, I., Williams, A., Croft, T., Togneri, M., Edmunds, M., Zangiabadi, E., Fairley, I., Karunarathna, H., & Croft, N. (2015). A Comparison of Numerical Modelling Techniques for Tidal Stream Turbine Analysis. Energies, 8(8), 7833-7853.
https://doi.org/10.3390/en8087833, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23189
www.mdpi.com/journal/energies
Zangiabadi, E., Edmunds, M., Fairley, I., Togneri, M., Williams, A., Masters, I., & Croft, N. (2015). Computational Fluid Dynamics and Visualisation of Coastal Flows in Tidal Channels Supporting Ocean Energy Development. Energies, 8(6), 5997-6012.
https://doi.org/10.3390/en8065997, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22297
www.mdpi.com/journal/energies
Jothi, S., Croft, T., Brown, S., Brown, S., & Croft, N. (2015). Modelling the influence of microstructural morphology and triple junctions on hydrogen transport in nanopolycrystalline nickel. Composites Part B: Engineering, 75, 104-118.
https://doi.org/10.1016/j.compositesb.2014.09.042, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20104
Jothi, S., Croft, T., Brown, S., Brown, S., Croft, N., & Jothi, S. (2015). Coupled macroscale-microscale model for hydrogen embrittlement in polycrystalline materials. International Journal of Hydrogen Energy, 40(6), 2882-2889.
https://doi.org/10.1016/j.ijhydene.2014.12.068, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa19984
Hayes, C., Croft, T., Campbell, A., Douglas, I., Gadoury, P., Schock, M., & Croft, N. (2014). Computational modelling techniques in the optimization of corrosion control for reducing lead in Canadian drinking water. Water Quality Research Journal of Canada, 49(1), 82-93.
https://doi.org/10.2166/wqrjc.2013.009, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22003
Jothi, S., Croft, T., Brown, S., Brown, S., & Croft, N. (2014). Influence of grain boundary misorientation on hydrogen embrittlement in bi-crystal nickel. International Journal of Hydrogen Energy, 39(35), 20671-20688.
https://doi.org/10.1016/j.ijhydene.2014.07.020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18611
Edmunds, M., Malki, R., Williams, A., Masters, I., Croft, T., Masters, I., Croft, N., & Williams, A. (2014). Aspects of tidal stream turbine modelling in the natural environment using a coupled BEM–CFD model. International Journal of Marine Energy, 7, 20-42.
https://doi.org/10.1016/j.ijome.2014.07.001, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20863
Malki, R., Masters, I., Williams, A., Nick Croft, T., & Croft, N. (2014). Planning tidal stream turbine array layouts using a coupled blade element momentum – computational fluid dynamics model. Renewable Energy, 63, 46-54.
https://doi.org/10.1016/j.renene.2013.08.039, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20865
Jothi, S., Croft, T., Brown, S., de Souza Neto, E., Brown, S., Croft, N., & Jothi, S. (2014). Finite element microstructural homogenization techniques and intergranular, intragranular microstructural effects on effective diffusion coefficient of heterogeneous polycrystalline composite media. Composite Structures, 108, 555-564.
https://doi.org/10.1016/j.compstruct.2013.09.026, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18612
Belblidia, F., Croft, T., Hardy, S., Shakespeare, V., Chambers, R., Belblidia, F., & Croft, N. (2013). Simulation based aerosol can design under pressure and buckling loads and comparison with experimental trials. Materials & Design
https://doi.org/10.1016/j.matdes.2013.05.041, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15028
Masters, I., Malki, R., Williams, A., Croft, T., & Croft, N. (2013). The influence of flow acceleration on tidal stream turbine wake dynamics: A numerical study using a coupled BEM–CFD model. Applied Mathematical Modelling
https://doi.org/10.1016/j.apm.2013.06.004, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15141
Rolland, S., Thatcher, M., Newton, W., Williams, A., Croft, T., Gethin, D., Cross, M., Cross, M., Croft, N., Williams, A., & Rolland, S. (2013). Benchmark experiments for simulations of a vertical axis wind turbine. Applied Energy, 111, 1183-1194.
https://doi.org/10.1016/j.apenergy.2013.06.042, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15624
Rolland, S., Newton, W., Williams, A., Croft, T., Gethin, D., Cross, M., Cross, M., Croft, N., Williams, A., & Rolland, S. (2013). Simulations technique for the design of a vertical axis wind turbine device with experimental validation. Applied Energy
https://doi.org/10.1016/j.apenergy.2013.04.026, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15625
McBride, D., Croft, T., Cross, M., Bennett, C., Gebhardt, J., Croft, N., & McBride, D. (2013). Optimization of a CFD – Heap leach model and sensitivity analysis of process operation. Minerals Engineering, 63, 57-64.
https://doi.org/10.1016/j.mineng.2013.11.010, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18573
Winfield, D., Croft, N., Cross, M., & Paddison, D. (2013). Incorporating dust lift-off into a CFD model of a blast furnace gravity dust-catcher. Applied Mathematical Modelling, 37(16-17)-7904.
https://doi.org/10.1016/j.apm.2013.04.042, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15622
Carswell, D., Hilton, A., Chan, C., McBride, D., Croft, N., Slone, A., Cross, M., & Foster, G. (2013). Development of a radial ventricular assist device using numerical predictions and experimental haemolysis. Medical Engineering & Physics, 35(8), 1197-1203.
https://doi.org/10.1016/j.medengphy.2012.12.008, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14342
Humphreys, N., McBride, D., Shevchenko, D., Croft, T., Withey, P., Green, N., Cross, M., Cross, M., Croft, N., & McBride, D. (2013). Modelling and validation: Casting of Al and TiAl alloys in gravity and centrifugal casting processes. Applied Mathematical Modelling, 37(14-15)-7643.
https://doi.org/10.1016/j.apm.2013.03.030, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15626
Winfield, D., Paddison, D., Cross, M., Croft, N., & Craig, I. (2013). Performance comparison of a blast furnace gravity dust-catcher vs. tangential triple inlet gas separation cyclone using computational fluid dynamics. Separation and Purification Technology, 115-215.
https://doi.org/10.1016/j.seppur.2013.04.035, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15627
McBride, D., Humphreys, N., Croft, T., Green, N., Cross, M., Withey, P., Cross, M., Croft, N., & McBride, D. (2013). Complex free surface flows in centrifugal casting: Computational modelling and validation experiments. Computers & Fluids, 82, 63-72.
https://doi.org/10.1016/j.compfluid.2013.04.021, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15589
Zhenmin, P., Zhao, G., Michael, N., Robert, S., Nick, C., Rami, M., Ian, M., Chuck, H., Masters, I., Croft, N., & Laramee, B. (2013). Visualization of flow past a marine turbine: the information-assisted search for sustainable energy. Computing and Visualization in Science, 16(3), 89-103.
https://doi.org/10.1007/s00791-014-0229-4, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa24667
Carswell, D., McBride, D., Croft, T., Slone, A., Cross, M., Foster, G., Cross, M., Croft, N., & McBride, D. (2013). A CFD model for the prediction of haemolysis in micro axial left ventricular assist devices. Applied Mathematical Modelling, 37(6), 4199-4207.
https://doi.org/10.1016/j.apm.2012.09.020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14291
Togneri, M., Malki, R., Williams, A., Croft, T., Togneri, M., Masters, I., Masters, I., Croft, N., & Williams, A. (2013). A coupled blade element momentum – Computational fluid dynamics model for evaluating tidal stream turbine performance. Applied Mathematical Modelling, 37(5), 3006-3020.
https://doi.org/10.1016/j.apm.2012.07.025, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12563
Winfield, D., Cross, M., Croft, N., Paddison, D., & Craig, I. (2013). Performance comparison of a single and triple tangential inlet gas separation cyclone: A CFD Study. Powder Technology, 235-531.
https://doi.org/10.1016/j.powtec.2012.10.026, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15623
Hayes, C., Croft, T., & Croft, N. (2012). An investigation into the representativeness of random daytime sampling for lead in drinking water, using computational modelling. Journal of Water Supply: Research and Technology—AQUA, 61(3), 142
https://doi.org/10.2166/aqua.2012.092, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13874
Peng, Z., Grundy, E., Laramee, R., Chen, G., Croft, N., Croft, N., Laramee, B., & Grundy, E. (2012). Mesh-Driven Vector Field Clustering and Visualization: An Image-Based Approach. IEEE Transactions on Visualization and Computer Graphics, 18(2), 283-298.
https://doi.org/10.1109/TVCG.2011.25, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa7695
Winfield, D., Cross, M., Croft, N., & Paddison, D. (2012). Geometry optimisation of a gravity dust-catcher using computational fluid dynamics simulation. Chemical Engineering and Processing: Process Intensification, 62, 137-144.
https://doi.org/10.1016/j.cep.2012.08.001, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14290
M., E., R.S., L., R., M., I., M., T.N., C., G., C., E., Z., Masters, I., Croft, N., & Laramee, B. (2012). Automatic Stream Surface Seeding: A Feature Centered Approach. Computer Graphics Forum, 31(3pt2), 1095-1104.
https://doi.org/10.1111/j.1467-8659.2012.03102.x, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa24671
Deganello, D., Williams, A., Croft, T., Lubansky, A., Gethin, D., Claypole, T., Gethin, D., Croft, N., Williams, A., & Deganello, D. (2011). Level-set method for the modelling of liquid bridge formation and break-up. Computers & Fluids, 40(1), 42-51.
https://doi.org/10.1016/j.compfluid.2010.08.002, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15010
Deganello, D., Croft, N., Williams, A., Lubansky, A., Gethin, D., & Claypole, T. (2011). Numerical simulation of dynamic contact angle using a force based formulation. Journal of Non-Newtonian Fluid Mechanics, 166(16), 900-907.
https://doi.org/10.1016/j.jnnfm.2011.04.008, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14254
Williams, A., Slone, A., Croft, T., Cross, M., Cross, M., Croft, N., & Williams, A. (2010). A mixed Eulerian–Lagrangian method for modelling metal extrusion processes. Computer Methods in Applied Mechanics and Engineering, 199(33-36), 2123
https://doi.org/10.1016/j.cma.2010.03.001, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5793
Willis, M., Croft, N., Lin, B., Williams, A., Mason-Jones, A., Fidler, R., Loman, J., Wooldridge, C., Thomas, S., Cook, A., Gallie, R., O’Doherty, T., O’Doherty, D., Gao, G., Ahmadian, R., Muhasilovic, M., Masters, I., Horsfall, I., Cross, M...., & Evans, P. (2010). Tidal turbine deployment in the Bristol Channel: a case study. Proceedings of the ICE - Energy, 163(3)-105.
https://doi.org/10.1680/ener.2010.163.3.93, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15621
Croft, T., Cross, M., Slone, A., Williams, A., Bennett, C., Blot, P., Bannear, M., Jones, R., Cross, M., Croft, N., & Williams, A. (2009). CFD analysis of an induration cooler on an iron ore grate-kiln pelletising process. Minerals Engineering, 22(9-10), 859
https://doi.org/10.1016/j.mineng.2009.03.011, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5794
Croft, T., McBride, D., Cross, M., Gebhardt, J., Cross, M., Croft, N., & McBride, D. (2009). Multi-component free surface flows and rotating devices in the context of minerals processing. International Journal of Computational Fluid Dynamics, 23(2), 93
https://doi.org/10.1080/10618560902733654, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5795
J., E., M., C., T., N., L., M., & Croft, N. (2008). Applications of Multi-Physics Modeling in Metallurgical Processing. Resources Processing, 55(3), 132-138.
https://doi.org/10.4144/rpsj.55.132, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25932
McBride, D., Croft, T., Cross, M., Cross, M., Croft, N., & McBride, D. (2008). A coupled finite volume method for the computational modelling of mould filling in very complex geometries. Computers & Fluids, 37(2), 170
https://doi.org/10.1016/j.compfluid.2007.06.001, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5796
Croft, T., Williams, A., Slone, A., Cross, M., Cross, M., Croft, N., & Williams, A. (2008). A two-dimensional prototype multi-physics model of the right ventricle of the heart. International Journal for Numerical Methods in Fluids, 57(5)-600.
https://doi.org/10.1002/fld.1764, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15620
K., P., G., D., B., L., T.-N., C., J.-F., D., P., G., & Croft, N. (2008). Time-dependent modelling and experimental validation of the metal/flux interface in a continuous casting mould. Revue de Métallurgie, 105(1), 33-43.
https://doi.org/10.1051/metal:2008011, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25931
McBride, D., Croft, T., Cross, M., Croft, N., & McBride, D. (2007). A coupled finite volume method for the solution of flow processes on complex geometries. International Journal for Numerical Methods in Fluids, 53(1), 81
https://doi.org/10.1002/fld.1250, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1975
Croft, N. (2007). Computational modelling of multi-physics and multi-scale processes in parallel. International Journal of Computational Methods in Engineering Science and Mechanics, 8
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25905
Slone, A., Croft, T., Williams, A., Cross, M., Croft, N., & Slone, A. (2007). An alternative mixed Eulerian Lagrangian approach to high speed collision between solid structures on parallel clusters. Advances in Engineering Software, 38(4), 244
https://doi.org/10.1016/j.advengsoft.2006.09.015, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1979
McBride, D., Croft, N., Cross, M., Croft, N., & McBride, D. (2007). Finite volume method for the solution of flow on distorted meshes. International Journal of Numerical Methods for Heat & Fluid Flow, 17(2), 213-239.
https://doi.org/10.1108/09615530710723975, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18567
Williams, A., Croft, T., Cross, M., & Croft, N. (2006). A group based solution strategy for multi-physics simulations in parallel. Applied Mathematical Modelling, 30(7), 656
https://doi.org/10.1016/j.apm.2005.09.002, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1973
Cross, M., Croft, T., Djambazov, G., Pericleous, K., & Croft, N. (2006). Computational modelling of bubbles, droplets and particles in metals reduction and refining. Applied Mathematical Modelling, 30(11), 1445
https://doi.org/10.1016/j.apm.2006.03.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1974
Croft, N. (2006). Computational fluid dynamics: Advancements in Technology for modeling Iron and steelmaking processes. AIST Transactions, 3
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25910
Croft, N. (2006). Computational Modeling of Mold Filling and Related Free-Surface Flows in Shape Casting: An Overview of the Challenges Involved. Metallurgical and Materials Transactions B, 37B
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25909
Croft, N., Cross, M., & McBride, D. (2006). Computational modelling of variably saturated flow in porous media with complex three--dimensional geometries. International Journal for Numerical Methods in Fluids, 50
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25907
Cross, M., Bennett, C., Croft, T., McBride, D., Gebhardt, J., Cross, M., Croft, N., & McBride, D. (2006). Computational modeling of reactive multi-phase flows in porous media: Applications to metals extraction and environmental recovery processes. Minerals Engineering, 19(10), 1098
https://doi.org/10.1016/j.mineng.2006.05.004, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1970
Cross, M., McBride, D., Croft, T., Williams, A., Pericleous, K., Lawrence, J., Croft, N., & McBride, D. (2006). Computational modeling of mold filling and related free-surface flows in shape casting: An overview of the challenges involved. Metallurgical and Materials Transactions B, 37(6), 879-885.
https://doi.org/10.1007/BF02735009, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18566
Croft, N. (2005). Assessing the parallel performance of multi-physics tools for modelling of solidification and melting processes. International Journal of High Performance Computing Applications, 19
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25911
Williams, A., Croft, T., Cross, M., & Croft, N. (2003). Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34(5), 727
https://doi.org/10.1007/S11663-003-0042-9, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa1972
Croft, N. (2003). Modelling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34B
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25912
Croft, N. (2002). The multiphysics modeling of solidification and melting processes. JOM-e
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23537
Croft, N. & Williams, A. (2002). Computational modelling of metal extrusion and forging processes. Journal of Materials Processing Technology, 125--126
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23538
Croft, N. (2000). A computational model for defect prediction in shape casting based on the interaction of free surface flow, heat transfer and solidification phenomena. Metallurgical and Materials Transactions B, 31B
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25914
Croft, N. (1996). PHYSICA - A software environment for the modelling of multi-physics phenomena. ZAMM, 76
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25915

Penodau Llyfrau

Croft, T., Carswell, D., Cross, M., McBride, D., Rolland, S., Slone, A., Williams, A., & Croft, N. (2010). Computational Modelling of Flows through Rotating Systems. Developments in Engineering Computational Technology (pp. 131-148). Kippen : Saxe-Coburg
https://doi.org/10.4203/csets.26.6, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25930
Slone, A., Williams, A., Croft, T., Cross, M., & Croft, N. (2009). Dynamic Fluid Structure Interaction in Parallel: A Challenge for Scalability. Parallel, Distributed and Grid Computing for Engineering (pp. 329-350). Civil-Comp
https://doi.org/10.4203/csets.21.15, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25927
Cross, M., Slone, A., Williams, A., Croft, T., & Croft, N. (2005). Computational Modelling of Thermal-Fluid-Structure Interaction Processes. Innovation in Civil and Structural Engineering Computing (pp. 111-126). Civil-Comp
https://doi.org/10.4203/csets.12.6, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25928
Cross, M., Baily, C., Pericleous, K., Croft, T., Taylor, G., & Croft, N. (2000). Issues in the Design of Computational Software Technology for the Simulation of Closely Coupled Multi-Physics Processes on Parallel Systems. Computational Mechanics for the Twenty-First Century (pp. 205-217). Civil-Comp
https://doi.org/10.4203/csets.3.11, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25926

Cyfraniadau Cynadleddau

Merin, B., Nick, C., Miles, W., Ian, M., Cheong, S., & Croft, N. (2014). Comparison of underwater background noise during Spring and Neap tide in a high tidal current site: Ramsey Sound. Acoustical Society of America (ASA).
https://doi.org/10.1121/1.4865924, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25903
Croft, T., Carswell, D., Cross, M., McBride, D., Rolland, S., Slone, A., Williams, A., & Croft, N. (2009). Parallel Computational Fluid Dynamics: Not without its Challenges. Civil-Comp.
https://doi.org/10.4203/ccp.90.45, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25920
Slone, A., Williams, A., Croft, T., Cross, M., & Croft, N. (2008). Dynamic Fluid Structure Interaction on Parallel Clusters. Civil-Comp.
https://doi.org/10.4203/ccp.89.10, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25921
Cross, M., Croft, T., McBride, D., Slone, A., Williams, A., & Croft, N. (2007). Using Mixed Discretisation Schemes in Multi-Physics Simulation. Civil-Comp.
https://doi.org/10.4203/ccp.85.1, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25919
Slone, A., Croft, T., Williams, A., Cross, M., & Croft, N. (2006). A Mixed Eulerian Lagrangian Approach to High Speed Collision between Solid Structures on Parallel Clusters. Civil-Comp.
https://doi.org/10.4203/ccp.84.118, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25922
M., C., C., B., K., P., N., C., K., M., G., T., S., B., G., M., D., W., & Croft, N. (1998). Fluid structure interaction in design optimisation and manufacturing on high performance parallel systems. In 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and OptimizationAmerican Institute of Aeronautics and Astronautics (AIAA).
https://doi.org/10.2514/6.1998-4979, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25918

Cynnyrch Ymchwil Arall

Mark, C., Diane, M., Nick, C., & Croft, N. (2014). Celebrating the Megascale
https://doi.org/10.1002/9781118889657.ch33, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25902
R., M., I., M., A., J., T., N., & Croft, N. (2013). MARINE 2011, IV International Conference on Computational Methods in Marine Engineering
https://doi.org/10.1007/978-94-007-6143-8_8, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25923
N., J., D., M., T.N., C., D., M., N., R., M., C., & Croft, N. (2012). CFD Modeling and Simulation in Materials Processing
https://doi.org/10.1002/9781118364697.ch22, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25924
R., H., T., N., C.-H., L., & Croft, N. (2002). Computational Science — ICCS 2002
https://doi.org/10.1007/3-540-46080-2_50, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25925
Kevin, M., Mark, C., Chris, W., Nick, C., Alison, W., & Croft, N. (2002). Computational Science — ICCS 2002
https://doi.org/10.1007/3-540-46080-2_85, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25913

Goruchwyliaeth

Not discussed with the sponsor company yet (cyfredol)

PhD

Goruchwyliwr arall: Dr Alper Celik
Numerical Methods for a Novel Vertical Axis Water Turbine System (dyfarnwyd 2024)

PhD

Goruchwyliwr arall: Dr Alison Williams
Towards Cost Effective and sustainable Renewable Energy Storage Batteries (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Prof Johann Sienz

Modiwlau a Addysgir

EG-396 Computational Aerodynamics

This module provides a concise overview on the basic principles of computational fluid dynamics as used in subsonic aerodynamics. The topics include the governing equations, finite difference and finite volume methods and iterative linear solvers. Training will also be provided on the use of computational fluid dynamics software as well as the implementation of relevant computational methods.
EG-M62 Group project (Aerospace)

This module enables students to participate in a group activity involving an integrated holistic approach to achieve a solution to a specific engineering problem. In most instances it will involve either direct interaction with industry or will be an industrially-related project. Issues other than providing a purely technical solution to the problem will have to be considered in order to achieve a satisfactory outcome to the project.
EG-M62J Group Project (Aerospace January)

This module enables students to participate in a group activity involving an integrated holistic approach to achieve a solution to a specific engineering problem. In most instances it will involve either direct interaction with industry or will be an industrially-related project. Issues other than providing a purely technical solution to the problem will have to be considered in order to achieve a satisfactory outcome to the project.
EGA118 Problem solving for Aerospace Engineers

The module provides an introduction to some of the problem solving techniques that can be used to address the type of problems that are encountered by aerospace engineers. The module will introduce students to the concepts of structured programming and software engineering. It will then use MATLAB to allow the students to practice using the techniques.

Dr Nick Croft

Rhif ffôn

Cyfeiriad ebost

Dolenni Ymchwil

Trosolwg

Meysydd Arbenigedd

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Holl Ymchwil

Erthyglau Cylchgronau

Penodau Llyfrau

Cyfraniadau Cynadleddau

Cynnyrch Ymchwil Arall

Goruchwyliaeth

Not discussed with the sponsor company yet (cyfredol)

Numerical Methods for a Novel Vertical Axis Water Turbine System (dyfarnwyd 2024)

Towards Cost Effective and sustainable Renewable Energy Storage Batteries (dyfarnwyd 2023)

Modiwlau a Addysgir

EG-396 Computational Aerodynamics

EG-M62 Group project (Aerospace)

EG-M62J Group Project (Aerospace January)

EGA118 Problem solving for Aerospace Engineers